Ebyte E180-DTU(Z20-ETH) User Manual page 62

Chengdu Ebyte Electronic Technology Co.,Ltd.
(2) Click "Query" to query the configuration parameters of the equipment. The short address of the transmission target is
0xFFFF, and the target port 0 xFF (i. e. 255) means that the device is broadcast by default in the transmission mode.
(3) Then the router equipment is set to transmit the data to the coordinator equipment in the form of on-demand, and the
coordinator equipment adopts the broadcast mode. In the upper computer interface of the router device, set the target short
address to 00 00 (i. e. 0x00 00), the target port is set to 01 (i. e. 0x01 or 1), and then click "Settings". After setting up, you can
click "Query" again to confirm whether the setting is successful.
Copyright ©2012–2023，Chengdu Ebyte Electronic Technology
Co.,Ltd.
Technology Co., LTD
Coordinator equipment, and the router equipment
E180-DTU(Z20-ETH) User Manual
62