Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co.,Ltd.
3.5 Serial port parameters
Note: Customers are advised to use default serial port parameters, not to modify!!!
Serial port parameters include: port rate, data bit, check bit, and stop bit.
Baud rate: Serial communication rate, configured with 1200,2400,4800,9600,14400,19200,38400,57600,115200 (default),
230400bps.
Data bit: length of the data bit, range 5,6,7 and 8.
Check bit: the check bit of data communication, support None, Odd, EN set the serial port parameters, keep the serial port
connection device to ensure the normal communication.
Stop bits: Set ranges 1,2.
3.6 Advanced Parameters
3.6.1 Network disconnection and reconnection function
In the client mode, the device tries to actively connect the server at the specified time after the network connection. If the
request times out and the set number of reconnections is not reconnected, the device will restart to prevent the network from
resuming the connection after the device is disconnected.
Reconnection time: the time interval between each attempt of the device to re-establish the network.
Number of reconnections: the number of times the device tries to reestablish the network, the cumulative number of
requests reaches the preset value, if the connection is not successful, the device will automatically restart.
Copyright ©2012–2023，Chengdu Ebyte Electronic Technology
Co.,Ltd.
Technology Co., LTD
E180-DTU(Z20-ETH) User Manual
32
Advertisement
Table of Contents
