Instructions; Data Transmission Tcp/Udp; Pc Communication - Ebyte NA611 User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.
Registration 4 sockets
package are the
parameter same
NTP time NTP Time zone offset
Modbus Modbus Enable
IP address
Subnet mask
Static IP
Gateway address
server address

5 Instructions

5.1 Data transmission TCP/UDP

5.1.1 PC communication

Refer to this example (TCP server, UDP) for the other two communications in TCP mode, and set different modes
through AT+MODE command.
(1) Set device role: AP, transmission mode: transparent transmission, service mode: TCP server; AT+MODE=1,1,1
(2) Configure SSID related parameters (SSID commonly known as WiFi name): AT+SSID=0, E103-W06-TEST, 2,
12345678.
(3) Set working frequency: AT+RADIO=1,36,0,0,CN
(4) Set IP address: AT+NETIP=192.168.1.111,255.255.255.0,192.168.1.31,192.168.1.31
(5) Set the port number: AT+SVRPORTIP=4001
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
data
Register 0（shut down）
package
type
Register 1（String）
package
data type
Register CDEBYTE-REGISTER-PACK-STR
package
data
480 (Unit: minutes) Beijing time
0（shut down Modbus）
10.145.45.1
255.255.255.0
10.145.45.1
10.145.45.1
【RS485⇌ WiFi】NA611 User Manual
AT+REGISTER
AT+NTPTIME
AT+MODBUS
AT+IPSTATIC
12