Network Parameters; Ip Address Type - Ebyte E180-DTU(Z20-ETH) User Manual

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

3.2.3.1 Transparent output.1

If the output mode of the configured device is transparent output, the module receives the wireless data and outputs the raw

data through the network port.

3.2.3.2 HEX instruction format output

When the output mode of the device is in the HEX instruction mode, the output data is output with the ZCL instruction in

the HEX instruction, and the HEX instruction identifies the transmission source of the data and the signal strength of the data;

3.3 Network parameters

Network parameters can be configured through the EBYTE network configuration tool and web pages!!!

EBYTE network configuration tool can click the network configuration button in ebai ZigBee 3.0 upper computer: open

ZigBee 3.0 upper computer, click Ethernet connection, click network configuration, enter EBYTE network configuration tool.

The IP address is the identity identification of modules in the LAN, and it is unique in the LAN. Therefore, it cannot be

repeated with other devices of the same LAN. The IP address of the module has two acquisition methods: static IP and DHCP.

Static IP: Static IP needs to be set manually by the user. In the process of setting, pay attention to write IP, subnet mask and

gateway at the same time. Static IP is suitable for scenes that need statistics of IP and devices and correspond to them one to one.

Advantages: Devices that cannot be assigned IP address can be searched through the whole network segment broadcast

mode, convenient for unified management;

Disadvantages: different LAN Intranet segments, resulting in no normal TCP / UDP communication.

Dynamic DHCP: The main function of DHCP is to dynamically obtain IP address, gateway address, DNS server address

and other information from the gateway host, so as to avoid the cumbersome steps of setting IP address. It is applicable to the

scenarios where there are no requirements for IP, and it does not require IP to correspond to modules one by one.

Advantages: Access routers and other devices with DHCP Server can be directly communicated, reducing the trouble of

Co.,Ltd.

Technology Co., LTD

EBYTE ZigBee 3.0 upper machine EBYTE network configuration tool

E180-DTU(Z20-ETH) User Manual

Table of Contents