Data Transmission - Ebyte E180-DTU User Manual

Hide thumbs Also See for E180-DTU:

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

In this way, several routers and endpoints can be joined to a coordinator network。

Notes：

If a router or endpoint that has joined the network needs to switch to the network established by another coordinator, you need to "exit the

network" or "restore the factory", and then set it up again according to the process in 4.4.3. Similarly, if the router that has joined the network

needs to be changed to an endpoint, or the endpoint that has joined the network needs to be changed to a router, you also need to "exit the

network" or "restore the factory"。

4.4.4 Data transmission

（1）Open the host computer software of the coordinator device and the network-connected device, click "Read Parameters", and confirm

that the current network status of the device is "connect", indicating that the device is networked。

Coordinator device

E18-DTU(Z27-ETH) User Manual

Router device

Table of Contents