Data Transmission Test - Ebyte E840-DTU User Manual

4g/lte serial server

Hide thumbs Also See for E840-DTU:

Table of Contents

Chengdu Ebyte Electronic Technology Co. Ltd

result is as shown below:

2.1 Data transmission test

⚫

Software tools used for the test are as follows：

Any serial port assistant, XCOM is used in this manual, which can be downloaded from our official website.

2.1.1 Operating mode is as follows：

1、operating mode includes：transparent transmission mode、AT configuration mode

a) Transparent transmission mode: After power-on, the radio works in the transparent transmission mode by default, and

automatically starts the network connection. When the connection is established with the server, any data received by the serial

port will be transparently transmitted to the server. At the same time, it can also receive data from the server. After receiving the

server data, the module will output directly through the serial port. The maximum length of data supported by this module is

1024 bytes. When multiple links are connected to the server at the same time, the data packet will be sent to the four links at the

same time. When there are data to be sent from any network link, the radio will transparently output the data.

b) Protocol transmission: This module supports 4-channel Socket connections. For each socket users can configured it as TCP

Client or UDP Client. When sending data, users can use protocol transmission or transparent transmission.

Protocol transmission format

Transmit：0x55 0xFE 0xAA ID data

For example：55 FE AA 02 AA BB

transmit

Receive：0xAA 0XFE 0x55 ID data length Data

//02： SOCK2 link，AA BB：the data that the user actually needs to

E840-DTU(4G-02)User Manual

Table of Contents