Default Parameters Of Radio Ethernet; Network Connection Test - Ebyte E180-DTU(Z20-ETH) User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.
subnet mask is 255.255.255.0, and the configured default gateway is 192.168.3.1.

4.3.2 Default parameters of Radio Ethernet

project
IP address
Default local port
subnet mask
default gateway
Default working mode
Serial port port rate
Serial port parameters

4.3.3 Network connection test

After the above operation steps, the network connection can be realized by following the factory default parameters and
performing the following operations.
The operation steps are performed as follows:
(1) Open the test TCP / IP debugging assistant software;
(2) "Network Settings" area, select TCP client mode (TCP Client), the remote host address corresponding (the
device default local IP: 192.168.3.7), the remote host port corresponding to the device factory local port 8887, click
connect;
Copyright ©2012–2023，Chengdu Ebyte Electronic Technology
Co.,Ltd.
Technology Co., LTD
Default parameter
192.168.3.7
8887
255.255.255.0
192.168.3.1
TCP Server
115200 (modifications not recommended)
8 / None / 1 (modifications not recommended)
E180-DTU(Z20-ETH) User Manual
52