Http Client Mode - Ebyte E180-DTU(Z20-ETH) User Manual

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

In UDP Client mode, the device will only communicate with the configured (destination IP and destination port) remote

UDP device.

In this mode, the target address is set to 255.255.255.255, and the sent data will be broadcast in the whole network segment,

but the transceiver device should ensure the same port, and the device can also receive the broadcast data.

3.4.5 HTTP client mode

This mode can realize the function of HTTP group package, provides GET and POST mode, customers can configure URL,

Header and other parameters, sent by equipment (serial server), realize the rapid communication of serial devices and HTTP

server, using the HTTP client mode suggest to use random port and open short connection, save HTTP server resources.

Co.,Ltd.

Technology Co., LTD

E180-DTU(Z20-ETH) User Manual

Table of Contents