Chengdu Ebyte Electronic Technology Co.,Ltd.
Note: After the device IP is modified, the configuration page entrance will change the modified IP address, which is
192.168.3.17. If the device IP is forgotten, we can restore the factory setting of network parameters through the Reload
button.
(3)The progress bar displays to 100%, indicating a successful parameter configuration submission.
4.4.2 Quickly build a ZigBee network
Copyright ©2012–2023,Chengdu Ebyte Electronic Technology
Co.,Ltd.
Technology Co., LTD
E180-DTU(Z20-ETH) User Manual
57