Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co.,Ltd.
(4) On the upper computer interface of the coordinator equipment, click "Refresh the equipment list" to see the new equipment
enter the network, and click "Equipment Temporary Storage Table", which also has the new equipment information.
(5) On the coordinator host interface, the terminal node device is set to bind the router device, so that the terminal node device
can transmit the data to the router device. In the upper computer interface of the coordinator device, click the "network
instruction" menu, fill the short address of the terminal device in the "target short address", fill in "source target SN", router SN
"target virtual SN" and cluster ID fill in 08 FC (customized data transmission cluster following the official ZigBee Cluster
Library specification of ZigBee alliance, see the ZigBee3.0 module HEX command standard specification), and then click
"setting regular connection".
Copyright ©2012–2023，Chengdu Ebyte Electronic Technology
Co.,Ltd.
Technology Co., LTD
E180-DTU(Z20-ETH) User Manual
66
Advertisement
Table of Contents
