Data Transmission Test - Ebyte NB114 User Manual

Hide thumbs Also See for NB114:

Table of Contents

Chengdu Ebyte Electronic Technology Co., Ltd.

Serial baud rate

Serial port parameters 8 / None / 1

2.3.3.Data transmission test

After the above operation steps, follow the factory default parameters of the equipment

and perform the following operations to realize the transparent data transmission test.

The operation steps are as follows:

（1） Open the test TCP/IP debugging assistant software;

（2） Select TCP Client mode in the "network setting area". The remote host address

corresponds to (default local IP of the device: 192.168.3.7). The remote host port

corresponds to the factory local port 8887 of the device. Click Connect;

（3） Wait for the computer to connect to the serial server. After the connection is

completed, the LINK light of the serial server is always on;

（4） Open the serial port assistant, set the serial port baud rate to 115200, set the

serial port parameter to 1/8/None, and click to open the serial port;

115200

NB114 User Manual

Table of Contents