Zigbee Build A Network Quickly; Preparation Of The Work - Ebyte E180-DTU(Z20-ETH) User Manual

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

(3) Wait for the computer to connect the device. After the connection, the LINK light of the device is always on,

indicating that the radio station has been connected to the network;

4.4 ZigBee Build a network quickly

In order to enable users to quickly familiarize themselves with radio stations, this section will guide users to build a

ZigBee network, including node type configuration, PANID setting, channel setting, and transmission power setting.

When using the ZigBee3.0 host, our station must be in TCP server (TCP Server) mode, otherwise the station cannot

connect to the host!!!

Before establishing the ZigBee network, we need to configure the network parameters of the radio station. We prepare 2~3

sets of equipment, here choose 3 E180-DTU (Z20-ETH) radio stations, users can also choose to use 1 E180-DTU (Z20-ETH)

radio station, the rest choose our E18 series, E180 series modules for testing.

We used the three sets of E180-DTU (Z20-ETH) as the coordinator, router and terminal respectively.

Coordinator device network parameter configuration



Configure the coordinator device network, connect our device to the computer, open the browser, type 192.168.3.7 in

（1）

the website input box, click Enter, come to the login page, enter the user name: admin, password: admin, and click login.

Co.,Ltd.

Technology Co., LTD

E180-DTU(Z20-ETH) User Manual

Table of Contents