Equipment Wiring; Ethernet Settings; Network Test Environment - Ebyte E180-DTU(Z20-ETH) User Manual

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

auxiliary materials shall be prepared.details are as follows:

E180-DTU(Z20-ETH)

DC 12V Power supply adapter

4.2 Equipment wiring

Connect the E180-DTU (Z20-ETH) device to the antenna, the power supply, and connect the network cable to the computer

simultaneously.

To avoid the customer in the actual application process of the server search failure, and can not open the web page and

other related problems, it is suggested to check the relevant Settings of the computer first.

（1） Turn off the computer firewall, anti-virus software;

（2） Configure the network card connected to the device;

（3） In this case, for the equipment directly connected to the computer test, the computer needs to configure the

computer as static IP (the computer directly connected to the device, no router to allocate, the computer can not get the IP

address), using the switch or router needs to ensure that the device and the computer are in the same network segment (such as:

192.168.3.xxx);

The static IP of the configured computer is 192.168.3.4 (the same network segment as the device), the configured

（4）

Co.,Ltd.

Technology Co., LTD

parvicostellae

antenna

E180-DTU(Z20-ETH) User Manual

computer

Table of Contents