Ebyte E180-DTU(Z20-ETH) User Manual page 67

Chengdu Ebyte Electronic Technology Co.,Ltd.
To ensure that the binding setting is valid, you can click "View regular connection" to confirm whether the binding is
successful. As shown in the figure, there is a module where cluster ID is 08 FC, Source SN is the terminal device, and Target
SN is the binding record of the router device, indicating that the binding setting is successful.
(6) In the upper computer interface of the terminal device, set the "target short address" to "FEFF" (0 xFFFE is invalid short
address, set the target short address to invalid short address, the device will automatically default the transmission target to
binding address), and click "Settings". Then enter "01 00" in "Module Add", click "Module Add", add the terminal device to
0x0001 group, and then click "Enter transmission mode".
Copyright ©2012–2023，Chengdu Ebyte Electronic Technology
Co.,Ltd.
Technology Co., LTD
E180-DTU(Z20-ETH) User Manual
67