Advertisement
STEP 3:
STEP 4:
1. Slide the Vertical Seat Post (pt.10) into
the seat post housing on the main frame
(pt.16).
2. Slide the Seat Post (pt.12) into the
Vertical Seat Post (pt.10),then Secure
using a flat washer 1 (20) and L Shape
knob (19).You will have to slacken the
knurled section of the L Shape Knob
(pt.42) and pull the knob back to select
the desired height. Release the knob and
retighten the knurled portion.
3. Secure the Seat (pt.13) to the Seat Post
(pt.12) as shown, and tighten the bolts
around the screws under the seat.
1. Slide the Handlebar Post (pt.17) into the
handlebar post housing on the main
frame (pt.16).
2. Follow the same procedure as in (STEP
3, 2) to secure the Handlebar (pt.18) with
a flat washer 1 (20) and L Shape knob
(19).
ATTENTION: ENSURE THE HANDLEBAR IS
SECURED TIGHTLY
3. Attach the Computer (pt.72) onto the
Computer Holder with bolt (pt.73). Then
connect the plug (A1&A2)
9
SP-880
Advertisement
