Table of Contents
Advertisement
FIREWALL
regardless HTTP access from the Internet to the local network is
blocked or permitted.
It is the origin of the request, not subsequent responses to this
request, which determines whether a session can be established.
SETTING FIREWALL CONFIGURATION
6.0a/
You can select a maximum, typical, or minimum security level to
block, limit, or permit all traffic. The following table shows request
access for each security level.
Security Level
Maximum
Typical
Minimum
The request access is defined as:
•
Blocked traffic - no access allowed, except as configured in Port
Forwarding and Remote Access
Limited - permits only commonly used services, such as email
•
and web browsing
Unrestricted - permits full access of incoming traffic from the
•
Internet and allows all outgoing traffic, except as configured in
Access Control
Internet Requests
Incoming Traffic
Blocked
Blocked
Unrestricted
Local Network
Requests
Outgoing Traffic
Limited
Unrestricted
Unrestricted
Advertisement
Table of Contents
