Verizon Fios-G1500 User Manual page 31

Enter the PIN number in the Client WPS PIN field. The
Client WPS PIN field is located in the section B - PIN
Enrollment on the user interface.
Click Register. Alternatively, you can enter the
Gateway's PIN shown on this screen into the WPS user
interface of your device, if this PIN mode is supported
by your wireless device.
After pressing the WPS button on your Gateway, you have
4.
two minutes to press the WPS button on the client device
before the WPS session times out.
When the WPS button on your Gateway is pressed, the
Wireless light on the front of your Gateway begins flashing
white. The flashing continues until WPS pairing to the
client device completes successfully. At this time, the
Wireless light turns solid white.
If WPS fails to establish a connection to a wireless client
device within two minutes, the Wireless light on your
Gateway flashes red for two minutes to indicate the WPS
pairing process was unsuccessful. After flashing red, the
light returns to solid white to indicate that Wi-Fi is on.
CONNECTING A WI-FI DEVICE USING A PASSWORD
Verify each device that you are connecting wirelessly
1.
(using Wi-Fi) has a built-in wireless or external wireless
adapter.
Open the device's wireless settings application.
2.
verizon.com/fios |
02/ CONNECTING
YOUR GATEWAY
©2018 Verizon. All Rights Reserved.
30