Table of Contents
Advertisement
•
Router Advertisement Lifetime (minutes between
0-150)
•
Interfaces - check one or more of the box(s) to apply
IPv6 LAN settings to the selected interfaces:
– Ethernet/Coax IPv6 Enabled
– Wireless Access Point 1 IPv6 Enabled
– Wireless Access Point 2 IPv6 Enabled
After entering all appropriate IPv6 settings click Apply to
3.
have changes take effect.
DHCPv6-PD - WAN IPv6 ADDRESS CONNECTION
The IPv6 WAN DHCPv6-PD configurations are IPv6 settings that
you enter that will allow your IPv6 connection to be updated by the
ISP as needed.
To configure IPv6 WAN Stateful (DHCPv6-PD) mode,
1.
select the Stateful (DHCPv6-PD) option on the IPv6
Configuration Control Page as shown below:
verizon.com/fios
|
08/ CONFIGURING
ADVANCED SETTINGS
©2018 Verizon. All Rights Reserved.
162
Advertisement
Table of Contents
