Table of Contents
Advertisement
Insert the screw anchors in the holes in the wall, then
6.
insert the screws into the screw anchors and tighten the
screws. Leave screws extended about 0.2 inches from the
wall.
Verify the screws are positioned correctly by placing the
7.
wall bracket on the screws. Remove the wall bracket from
the wall.
Place the Gateway on the wall bracket and slide the
8.
Gateway forward until it locks in place.
9.
10.
verizon.com/fios
|
01/ INTRODUCTION
To secure the
Gateway, attach
the bracket to the
Gateway using the
single screw you
removed from the foot.
Slide the wall mount
bracket with the
attached Gateway on
the screws, then slide
the bracket down until
it locks in place.
©2018 Verizon. All Rights Reserved.
16
Advertisement
Table of Contents
