Table of Contents
Advertisement
Specify the Stateless settings to be used to assign LAN
2.
IPv6 addresses by entering the following details:
•
IPv6 LAN Configuration (select Stateless from the
drop-down list) as shown in drop-down list and page
below:
•
LAN Prefix (automatically populated)
•
LAN IPv6 Link Local Address (automatically populated)
•
Subnet ID (hexadecimal values e.g. 0-9, a-f)
•
Router Advertisement Lifetime (minutes between
0-150)
Interfaces - check one or more of the box(s) to apply
•
IPv6 LAN settings to the selected interfaces:
– Ethernet/Coax IPv6 Enabled
– Wireless Access Point 1 IPv6 Enabled
– Wireless Access Point 2 IPv6 Enabled
After entering all appropriate IPv6 settings click Apply to
3.
have changes take effect.
verizon.com/fios
|
08/ CONFIGURING
ADVANCED SETTINGS
©2018 Verizon. All Rights Reserved.
166
Advertisement
Table of Contents
