Table of Contents
Advertisement
Specify the Stateful (DHCPv6) settings to be used to
2.
assign LAN IPv6 addresses by entering the following
details:
•
IPv6 LAN Configuration (select Stateful from the drop-
down list) as shown in drop-down list and page below:
•
LAN Prefix
•
LAN IPv6 Link Local Address (automatically populated)
•
LAN IPv6 Address Range (start and end)
•
Router Advertisement Lifetime (minutes between
0-150)
•
IPv6 Address Lifetime (minutes between 3-150)
•
Interfaces - check one or more of the box(s) to apply
IPv6 LAN settings to the selected interfaces:
– Ethernet/Coax IPv6 Enabled
– Wireless Access Point 1 IPv6 Enabled
– Wireless Access Point 2 IPv6 Enabled
After entering all appropriate IPv6 settings click Apply to
3.
have changes take effect.
verizon.com/fios
|
08/ CONFIGURING
ADVANCED SETTINGS
©2018 Verizon. All Rights Reserved.
160
Advertisement
Table of Contents
