Table of Contents
Advertisement
ROUTING
Specify the DHCPv6-PD method to be used to obtain your
2.
WAN IPv6 Address by entering:
•
IPv6 WAN Configuration (select DHCPv6 from the
drop-down list) as shown in drop-down list and page
below:
Check to either 'Obtain IPv6 DNS Server address
3.
automatically', or to 'Use the following IPv6 DNS Server
addresses'
After entering all appropriate IPv6 settings click Apply to
4.
have changes take effect.
DHCPv6-PD WAN WITH LAN IPv6 STATEFUL (DHCPv6)
SETTINGS:
To configure IPv6 LAN Stateful (DHCPv6-PD) mode,
1.
select the Stateful (DHCPv6-PD) option on the IPv6
Configuration Control Page as shown below:
Advertisement
Table of Contents
