Table of Contents
Advertisement
Specify the following parameters:
3.
•
Name – select the network type.
•
Destination - enter the destination IP of the destination
host, subnet address, network address, or default
route. The destination for a default route is 0.0.0.0.
•
Netmask – enter the network mask. This is used in
conjunction with the destination to determine when a
route is used.
Gateway – enter the IP address of your Gateway.
•
•
Metric – enter a measurement preference of the route.
Typically, the lowest metric is the most preferred route.
If multiple routes exist to a specific destination network,
the route with the lowest metric is used.
Routing Entry – select the routing entry, IPv4 or IPv6 (if
•
enabled)
Click Apply to save changes.
4.
IP ADDRESS DISTRIBUTION
8.4c/
You can easily add computers configured as DHCP clients to the
network. The DHCP server provides a mechanism for allocating IP
addresses to these hosts and for delivering network configuration
parameters to the hosts.
For example, a client (host) sends a broadcast message on the
network requesting an IP address for itself. The DHCP server then
verizon.com/fios
|
08/ CONFIGURING
ADVANCED SETTINGS
©2018 Verizon. All Rights Reserved.
172
Advertisement
Table of Contents
