Specify the Stateful (DHCPv6) settings to be used to
2.
assign LAN IPv6 addresses by entering the following
details:
•
IPv6 LAN Configuration (select Stateful from the drop-
down list) as shown in drop-down list and page below:
•
LAN Prefix
•
LAN IPv6 Address Range (start and end)
•
LAN IPv6 Link Local Address (automatically populated)
•
Subnet ID (hexadecimal values e.g. 0-9, a-f)
•
Router Advertisement Lifetime (minutes between
0-150)
verizon.com/fios
|
08/ CONFIGURING
ADVANCED SETTINGS
©2018 Verizon. All Rights Reserved.
164