Table of Contents
Advertisement
GETTING TO KNOW
YOUR GATEWAY
•
USB - provides up to 500 mA at 5 VDC for attached devices.
For example, you could charge a cell phone. In the future, with a
firmware upgrade, the USB host functionality may be available for
other devices, such as external storage and cameras. Firmware
updates are performed automatically by Verizon.
•
Reset Button - allows you to reset your Gateway to the factory
default settings. To reset the Gateway, press and hold the Reset
button for at least three seconds.
•
Ethernet LAN - connects devices to your Gateway using
Ethernet cables to join the local area network (LAN). The four
Ethernet LAN ports are 10/100/1000 Mbps auto-sensing and
can be used with either straight-through or crossover Ethernet
cables.
•
HAN Expansion Port - provides for future hardware upgrades to
add support for Home Area Networking capabilities.
•
Ethernet WAN - connects your Gateway to the Internet using an
Ethernet cable.
•
Coax WAN and LAN - connects your Gateway to the Internet
and/or to other MoCA devices using a coaxial cable.
Warning:
The WAN Coax Port is intended for connection to Verizon Fios
only. It must not be connected to any exterior or interior coaxial wires
not designated for Verizon Fios.
•
Power - connects your Gateway to an electrical wall outlet using
the supplied power adapter.
Warning:
The included power adapter is for home use only, supporting
voltages from 100-240Vac. Do not use in environments with greater
than 240Vac.
Advertisement
Table of Contents
