Table of Contents
Advertisement
1.3d/
MOUNTING THE GATEWAY TO A WALL
For optimum performance, the Fios Router is designed to stand in a
vertical upright position. Verizon does not recommend wall mounting
the Fios Router. However, if you wish to mount your Gateway,
you can purchase a wall mount bracket from the Verizon Fios
Accessories Store at verizon.com/fiosaccessories.
If you are replacing an existing Verizon wall mounted router, you do
not need to remove the mounting screws from the wall. The existing
mounting screws will fit the new bracket.
SCREW DIMENSIONS
0.41"
= 10.4mm
To mount your Gateway to a wall:
Remove the foot by turning the Gateway upside down
1.
and removing the single screw that holds the foot to the
Gateway.
Screw Dimensions
(measured from screw)
1.00"
= 25.4mm
verizon.com/fios
01/ INTRODUCTION
Hole Dimensions
0. 1 9"
= 4.8mm
|
©2018 Verizon. All Rights Reserved.
14
6mm
14mm
Advertisement
Table of Contents
