Table of Contents
Advertisement
– IGMP
– Daylight savings time support
GETTING TO KNOW YOUR GATEWAY
1.3/
1.3a/
FRONT PANEL
The front panel has two lighted indicators and a
WPS (Wi-Fi Protected Setup) button.
The Power/Internet light will be on and solid
when your Gateway is turned on, connected to
the Internet, and functioning normally.
The Wireless light will be on when your
Gateway Wi-Fi is turned on.
For additional information on the front
lights and error indications, refer the
Troubleshooting section in this Guide.
The WPS button is used to initiate Wi-Fi Protected Setup. This is an
easy way to add WPS capable devices to your wireless network.
When WPS is initiated from your Gateway, the wireless light slowly
flashes white for up to two minutes, allowing time to complete the
WPS pairing process on your wireless device (also known as a
wireless client).
When a device begins connecting to your Gateway using WPS, the
wireless light rapidly flashes white for a few seconds, then turns
solid white as the connection completes.
verizon.com/fios
|
01/ INTRODUCTION
©2018 Verizon. All Rights Reserved.
10
Advertisement
Table of Contents
