The Livepage - Bosch VIP X1600 M4S Installation And Operating Manual

VIP X1600 M4S
6.2

The LIVEPAGE

Once the connection is established, the Web browser displays the LIVEPAGE. It shows the
live video image on the right of the browser window. Depending on the configuration, various
text overlays may be visible on the live video image (see Section 5.13 Advanced Mode: Display
Stamping, page 37).
Other information may be shown next to live video image on the LIVEPAGE. The display
depends on the settings on the LIVEPAGE Functions page (see Section 5.15 Advanced Mode:
LIVEPAGE Functions, page 40).
Maximum Number of Connections
If you do not connect, the unit may have reached its maximum number of connections.
Depending on the unit and network configuration, each module can have up to 25 Web
browser connections or up to 50 connections via VIDOS or Bosch Video Management System.
Protected Module
If the module is password protected against unauthorized access, the Web browser displays a
message to that effect and prompts you to enter the password when you call up access-
protected areas.
NOTICE!
i
The module offers the option to limit the extent of access using various authorization levels
(see Section 5.11 Advanced Mode: Password, page 35).
1.
2.
Protected Network
If a RADIUS server is employed in the network for managing access rights (802.1x
authentication), the module must be configured accordingly, otherwise no communication is
possible.
To configure the unit, you must connect the VIP X1600 XF directly to a computer using a
network cable. This is because communication via the network is not enabled until the
Identity and Password parameters have been set and successfully authenticated (see
Section 5.38 Advanced Mode: Advanced, page 77).
CAUTION!
!
The switch used for the network must support the multi-host operation when using 802.1x
authentication and must be configured so that a VIP X1600 XF with several modules can try
several hosts for communicating over the network.
Switching between the Modules
If multiple modules have been installed in a VIP X1600 XF, you can easily switch between the
modules in the same unit.
NOTICE!
i
A module that is installed in another base must be selected via its IP address.
Bosch Security Systems
Enter the user name and associated password in the corresponding text fields.
Click OK. If the password is entered correctly, the Web browser displays the page that
was called up.
In the upper section of the window, click one of the links Module 1 to Module 4 to
switch to the corresponding module in the same VIP X1600 XF.
Installation and Operating Manual
Operation | en 91
DOC | V4.0 | 2009.06