Advanced Mode: Audio (Audio Version Only) - Bosch VIP X1600 M4S Installation And Operating Manual

VIP X1600 M4S
Priority
In the default configuration None, the computing power provided for individual tasks is
negotiated dynamically. This ensures the best possible video quality at all times. With the
MPEG-4/H.264 setting, video transmissions are given a higher priority and only a small
amount of power remains available for JPEG images. The JPEG setting is suitable for
applications that primarily require JPEG images, for example JPEG recordings. When this
setting is made the amount of power available for video images will be reduced.
5.20

Advanced Mode: Audio (Audio Version Only)

You can set the gain of the audio signals to suit your specific requirements. The current video
image is shown in the small window next to the slide controls to help you check the audio
source and improve assignments. Your changes are effective immediately.
If you connect via Web browser, you must activate the audio transmission on the LIVEPAGE
Functions page (see Section 5.15 Advanced Mode: LIVEPAGE Functions, page 40). For other
connections, the transmission depends on the audio settings of the respective system.
Audio
The audio signals are sent in a separate data stream parallel to the video data, and so increase
the network load. The audio data are encoded according to G.711 and require an additional
bandwidth of approx. 80 kbps for each connection. If you do not want any audio data to be
transmitted, select Off.
Line In 1 to Line In 4
You can set the gain for the line inputs. Make sure that the display does not go beyond the
green zone during modulation.
Bosch Security Systems Installation and Operating Manual
Configuration Using a Web Browser | en
DOC | V4.0 | 2009.06
47