Bosch VIP X1600 M4S Installation And Operating Manual page 24

24 en | Configuration Using a Web Browser
Establishing the Connection
At least the module in Slot 1 must be assigned a valid IP address and a compatible subnet
mask to operate the VIP X1600 XF on your network.
The following default address is preset at the factory: 192.168.0.1
1.
2.
Maximum Number of Connections
If you do not connect, the unit may have reached its maximum number of connections.
Depending on the unit and network configuration, each module can have up to 25 Web
browser connections or up to 50 connections via VIDOS or Bosch Video Management System.
Protected Module
If the module is password protected against unauthorized access, the Web browser displays a
message to that effect and prompts you to enter the password when you call up access-
protected areas.
NOTICE!
i
The module offers the option to limit the extent of access using various authorization levels
(see Section 5.11 Advanced Mode: Password, page 35).
1.
2.
Protected Network
If a RADIUS server is employed in the network for managing access rights (802.1x
authentication), the module must be configured accordingly, otherwise no communication is
possible.
DOC | V4.0 | 2009.06
Start the Web browser.
Enter the module's IP address as the URL. The connection is established and after a short
time you will see the LIVEPAGE with the video image.
Enter the user name and associated password in the corresponding text fields.
Click OK. If the password is entered correctly, the Web browser displays the page that
was called up.
Installation and Operating Manual
VIP X1600 M4S
Bosch Security Systems