Bosch VIP X1600 M4S Installation And Operating Manual page 85

VIP X1600 M4S
Configuration
You can save configuration data for the module on a computer and then load saved
configuration data from a computer to the module.
Upload
1.
2.
3.
Once the upload is complete, the new configuration is activated. The time remaining is shown
by the message going to reset Reconnecting in ... seconds. The unit reboots automatically
once the upload has successfully completed.
Download
1.
2.
SSL certificate
To be able to work with an SSL encrypted data connection, both ends of a connection must
hold the relevant certificates. You can upload the SSL certificate, comprising one or multiple
files, onto the module.
If you wish to upload multiple files onto the module, you must select them consecutively.
NOTICE!
i
The certificate must be created in the format *.pem so that it can be accepted by the unit.
1.
2.
3.
The new SSL certificate is valid.
Maintenance log
You can download an internal maintenance log from the module to send it to Customer
Service for support purposes. Click Download and select a storage location for the file.
Bosch Security Systems
Enter the full path of the file to upload or click Browse to select the required file.
Make certain that the file to be loaded comes from the same unit type as the unit you
want to configure.
Next, click Upload to begin transferring the file to the unit. The progress bar allows you
to monitor the transfer.
Click the Download button. A dialog box opens.
Follow the on-screen instructions to save the current settings.
Enter the full path of the file to upload or click Browse to select the required file.
Next, click Upload to begin transferring the file to the unit.
Once all files have been successfully uploaded, the unit must be rebooted. In the address
field of your browser, enter /reset after the IP address of the module (for example
192.168.0.16/reset).
Installation and Operating Manual
Configuration Using a Web Browser | en
DOC | V4.0 | 2009.06
85