Advanced Mode: Livepage Functions - Bosch VIP-X1XF Installation And Operating Manual

VIP X1 XF
5.15

Advanced Mode: LIVEPAGE Functions

On this page you can adapt the LIVEPAGE functions to your requirements. You can choose
from a variety of different options for displaying information and controls.
1.
2.
Transmit audio
You can only select this option if audio transmission is actually switched on (see
Section Audio, page 52).
The audio signals are sent in a separate data stream parallel to the video data, and so increase
the network load. The audio data are encoded according to G.711 and require an additional
bandwidth of approx. 80 kbps per connection in each direction.
Bilinx control (standard version only)
Next to the field for view control at the top left of the LIVEPAGE, an additional field is
displayed for the special Bosch Security Systems Bilinx control. Select the appropriate
protocol for the connected camera here.
Lease time [s] (standard version only)
The lease time in seconds determines the time beyond which a different user is authorized to
control the camera after no further control signals are received from the current user. After
this time interval, the camera is automatically enabled.
Show alarm inputs
Alarm inputs are shown next to the video image as icons, along with their assigned names. If
an alarm is active, the corresponding icon changes color.
Bosch Sicherheitssysteme GmbH
Check the box for the items that are to be made available on the LIVEPAGE. The selected
items are indicated by a check mark.
Check whether the required functions are available on the LIVEPAGE.
Installation and Operating Manual
Configuration using a Web browser | en
DOC | V4.54 | 2011.09
41