AE inspection & adjustment
1. AE CCD alignment/positioning inspection and adjustment
2. AE accuracy inspection and adjustment
3. Aperture accuracy inspection
4. M 1/8000 accuracy inspection and adjustment
5. Shutter monitor inspection and adjustment
6. TTL inspection and adjustment
* Grey shutter curtain of F90 is necessary.
7. AF PI duty adjustment
8. Battery Check inspection and adjustment
AF inspection & adjustment
Note : When using the adjustment software for the first time, prepare 5 cameras of F6. Then input the average
value of the 5 cameras, which was measured in checking the AF accuracy, in "WRITING OF AF ADJ.
LENS OFFSET VALUE" on the main menu.
〔 Inspection/adjustment items 〕
① AF accuracy inspection and adjustment (Make all the following adjustments.)
② YAW, PITCH
③ LARK adjustment
④ CCD output
〔 Tools required 〕
1. When adjusting for all adjustment items
Use the same tool as AE-related.
2. When inspecting AF accuracy
① AF adjustment lens ( J18266 )
② AF adjusting tool ( J15259 )
③ Lens holder for F4 (J15280) or Adapter for tripod ( J15271 )
④ AF chart (J15407)
⑤ Chart board for J15047 (J15409)
⑥ Chart illuminator for AF (J15264 )
3. When adjusting YAW, PITCH
① The above tool when inspecting AF accuracy
② YAW, PITCH tool ( J18230 )
4. When adjusting LARK
The above tool when inspecting AF accuracy
5. When adjusting CCD output
AF 50/1.4D lens
- A50 ・
-
FAA41051-R.3644.A