Advertisement
This inspection and adjustment software runs on Windows.
Install the software based on the below procedure.
<Operating environment>
The following operating environment is required for installing this program on PC.
PC
IBM PC/AT compatible
OS
Windows XP Home Edition, Windows Millennium Edition (Me), Windows 98
Second Edition (SE), Windows 98, Windows 95
80486 100MHz ～ Pentium Ⅲ 1.2GHz
CPU
RAM (memory)
32MB or more
HD
6MB-or-more free disk space is required when installing
Monitor resolution
800×600 pixels or more
Interface
Serial Interface
※ USB Interface is not available.
As long as the above hardware requirements are met, any PC such as desktop or laptop, etc is available.
<Notice on start-up>
When starting this program, close all the other applications.
If some other applications are running, this program may not be activated.
<Procedure for installation>
The file (F6SOFT.EXE) of this program is provided via FD or e-mail.
Because this is the self-extracting file, decompress the file before installing, following the next procedure.
1. Create a folder for installation under a name you like and PC drive.
(e.g.) C:\F6
F6 Inspection and Adjustment Software (J18375)
- Ａ47 ･
-
FAA41051-R.3644.A
Advertisement
