Advertisement
Prism, Screen and other small parts
・ Remove the screen.
・ Take out the screw (#1549) to remove the screen frame.
・ Take out 2 screws (#1110) to remove the screen holding plate (#1105).
・ Take out 2 screws (#1545) to remove 2 retaining plates (#1185). Then,
the bottom-display prism (#3011) comes off.
・ Detach #1204 which is attached with the both-sided adhesive tape (#1205)
by removing its tape. Then, take out the screw (#1561) and 2 screws
(#1560) to remove the eyepiece top cover (#1120).
・ Remove the holder B unit (#B1118).
・ Take out 2 screws (#1549) to remove the holder C unit (#B1119).
・ Remove the dust-proof tape (#1203).
・ Remove 2 penta retaining springs (#1112) and the penta retaining plate
(#B1111). (#1114 is also completely attached with the both-sided
adhesive tape.)
・ Remove the penta retaining sheet (#1113) to detach the prism.
・ The finder field frame A, lens spacer (#1109), S.I.display lens, and finder
field frame come off.
#1204
#1561
#1549×2
#B1119
#1185×2
#1545×2
#3011
Prism box
Screen
Screen frame
- D29 ･
FPC unit attached with both-sided
adhesive tape (#1194)
#1114
#B1111
#1112×2
#1113
#1205
#1560×2
Prism
#1120
#B1118
Finder field frame A
#1109
S.I.display lens
Finder field frame B
#1549
-
FAA41051-R.3644.A
#1203
#1105
#1110×2
Advertisement
