AF driving unit, Light-shielding plate
AF driving unit
★ Newly prepared grease
#313
#1562
#336
・ Vertically
・ Horizontally
・ Apply the EDC0021 to 3 locations.
・ Check that the glue is not forced out of the mirror holder
・ Check that the mirror move up and down smoothly
#323×2
#351
Grease: FG-50W
★
Apply to each gear and shaft.
#332
#334
#335
#1553×3
#322×2
- A5 ・
Attach the light-shielding plate (#201)
Position
Attach at the position approx. 0.5 mm downward from
the upper edge of the front body.
Edges of the I-board
Adhesive
Note)
surface when mirror is up.
without abnormal noise.
Adhesive: EDC0021
#201
#324
#321
#325
-
FAA41051-R.3644.A