Advertisement
Height adjustment of Aperture lever
Height adjustment of AF coupling shaft (#351)
1.7±0.1 mm
Bayonet face
#351
Aperture lever
Adjustable screw
Adhesive: EDB0011
Apply after the
adjustment.
Lens release pin
Lens release button
Adhesive: C-8008B
#359
Apply after the
adjustment
- Ａ8 ･
● Measure the height of the apreture lever by using
the tool (J18004).
Standard: 3.4±
mm
0.1
0.05
When the height of the apreture lever is out
of standard, turn the adjustable screw for
adjustments.
① Set the SCM change-lever (#383) to "S".
After pressing the lens release button a few
times, measure the height of the AF coupling
shaft (#351).
② Adjust the height of the AF coupling shaft by
using the screw (#359).
③ When the height of the lens release pin
becomes 0.4 mm, do not protrude the AF
coupling shaft from the bayonet face.
④ After the adjustment, fix the screw (#359) with
the adhesive (C-8008B).
-
FAA41051-R.3644.A
Advertisement
