Advertisement
Prisim box
Remove Prism box unit from Front body
・ Remove the lens GND lead wire from the prism box.
・ Take out 4 screws (#1188).
・ (∞)-alignment adjustable washers (#1180 and #1181) come off by removing the prism box unit.
Lens GND lead wire
Remove S.I. (Super Impose) unit
#1577 × 2
S.I. unit
#1180
Soldering bridge×8
・ Take out 2 screws (#1577) to remove the S.I.unit.
※ Unless the S.I.unit and Penta FPC unit are not replaced,
removing soldering bridges is NOT necessary.
・ Remove the soldering bridges of the penta-FPC to detach
the S.I.unit.
- D27 ･
-
FAA41051-R.3644.A
#1188×4
#1181
Advertisement
