Advertisement
Assemble Reset base unit/Back door removal key
#1505×2
1505
・ Assemble the reset base unit by pulling it toward
the direction of the arrow A for positioning.
・ After assembling the reset base unit,
① Check that after pushing the back door SW pin
(#851) toward the direction, it gets back to the
original position.
② Check that after pushing the planetary gear unit
(#B875) toward the direction, it gets back to
the original position.
＊ The reset-Mg mentioned on the previous page
must remain attached.
Reset base unit
#B875
#30
30
#851
851
- Ａ20 ･
#1517×2
#1532
1532
#944
944
#943
943
941
#942×2
942x2
#873
873
#948×2
948x2
#862
862
-
FAA41051-R.3644.A
Back door removal key
Advertisement
