Advertisement
Prism box
Prism, Screen, other small parts
・ Attach the tape (#1196) on the prism box. (Fig.1)
・ Put the fi nder fi eld frame B, and assemble it with the
S.I.display lens by aligning their directions. (Fig.2)
・ Install the lens spacer (#1109).
・ Install the fi nder fi eld frame A.
・ Mount the prism.
・ Attach the penta retaining sheet (#1113).
・ Put the penta retaining plate (#B1111), and fi x it with 2
penta retaining springs (#1112).
・ Attach the penta retaining insulating sheet (#1114).
・ Attach the dust-proof tape (#1203). (Fig.3)
・ Fix the holder C unit (#B1119) with 2 attaching screws
(#1549).
・ Mount the holder B unit (#B1118).
・ Apply the grease to the back side of the eyepiece top
cover (#1120) and assemble it. Then fi x it with 1 screw
(#1561) and 2 screws (#1560). (Fig.4)
・ Attach #1204 with the tape (#1205).
Grease: MZ-800S
Apply thinly
Fig.4
#1545×2
Fig.1
・ Attach the antirefl ection tape (#1200)
on the bottom-display prism (#3011).
・ Mount the bottom-display prism
(#3011), and fi x it with 2 retaining
plates (#1185) and the screw
(#1545).
・ Put the screen holding plate (#1105)
and fi x it with 2 screws (#1110).
・ Put the screen frame and fi x it with
the screw (#1549).
・ Install the screen.
#1204
#1561
#1120
#1549×2
#B1119
#1185×2
#3011
#1200
Prism box
Screen
Screen frame
- Ａ10 ･
Both-sided adhesive
tape (#1194)
#1114
#B1111
#1112×2
#1113
#1205
#1560×2
Prism
#B1118
Finder fi eld
frame A
#1196
#1109
S.I.display lens
Finder fi eld
frame B
#1105
#1549
-
FAA41051-R.3644.A
Fig.3
#1203
Gate face comes to
the eyepiece side
Fig.2
#1110×2
Advertisement
