FAA41051-R.3644.A
AE CCD alignment inspection and adjustment
When the penta-FPC unit or the prism box is disassembled or replaced, be sure to inspect and adjust based on
the following.
#1133×3
Preparation
① Give 3 screws (#1133) about 9 turns to tighten them.
② Remove the finder screen. Insert the AE sensor positioning tool
(J15413) instead.
J15413
③ Attach the bottom cover and grip temporarily with screws.
Grip
Bottom cover
④ Connect the top cover and the main FPC with the relay FPC A.
Note: Do NEVER insert the FPC twisted! The camera may be troubled. Refer to "Tool" section for how to
connect them.
⑤ Supply power for camera, and connect the PC.
- A34 ・
-