Advertisement
③ Relay-FPC C （ J18374 ）＝ Connect the main FPC and the penta-FPC unit
・ This is used for checking lighting of the inner LCD.
How to check lighting of the inner LCD
① Create a self-made power tool. （ Refer to the next page for how to create it. ）
② Connect the self-made tool and the penta-FPC with the relay-FPC C.
＊ Note ・ Do NEVER insert the FPC twisted! The camera may be troubled.
・ Insert the FPC into the connector all the way seated. Otherwise, the camera may be troubled.
Self-made power tool
③ Supply 5.0V/1.0A for the self-made power tool through the stabilized power supply, and check the lighting of
the inner LCD through the eyepiece lens unit.
④ Adjust position of the inner LCD if necessary.
＊ Note: Be careful to prevent electric parts from being short-curcuited.
The gold pattern of
FPC comes outside.
Relay-FPC C
- T6 ･
-
FAA41051-R.3644.A
Advertisement
