Nikon F6 Repair Manual page 36

Remove Penta-FPC unit (In case Penta-FPC is NOT replaced)
#1169× 2
・ Remove 2 pieces of dust-proof tape (#1169).
・ Take out 2 screws (#1566) to remove the horizontal-display
LCD unit.
・ Remove the dust-proof tape (#1164).
・ Take out 2 screws (#1566) to remove the
bottom-display LCD unit.
・ Take out 2 screws (#1565) to remove the
AE sensor holder unit.
・ Remove the penta-FPC unit from the
penta. (Note that it is attached with the
both-sided adhesvie tape.)
Remove Penta-FPC unit (In case Penta-FPC is replaced)
・ Remove 2 pieces of dust-proof tape (#1169).
・ Take out 2 screws (#1566) to remove the horizontal-display
LCD unit.
#1169×2
・ Remove the dust-proof tape (#1164).
・ Take out 2 screws (#1566) to remove
the bottom-display LCD unit.
・ Take out 3 screws (#1133) to remove
the penta-FPC unit from the penta.
(Note that they are attached with the
both-sided adhesive tape.)
・ Remove 3 springs (#1134).
・ Take out 2 screws (#1565) to remove
the AE sensor holder (#B1131).
#1566×2
Horizontal-display
LCD unit
#1164
#1566×2
Horizontal-display
LCD unit
- D28 ･
Penta-FPC unit
AE sensor holder unit
#1566×2
#1200
Bottom-display LCD unit
#1133×3
#1134×3
#1566×2
#1164
#1200
Bottom-display LCD unit
-
FAA41051-R.3644.A
#1565× ２
Penta-FPC unit
#1565×2
#B1131