Advertisement
Mount AE sensor holder
・ Attach the dust-proof tape (#1187) to cover up the adjustable-screw hole of the AE sensor holder (#B1131).
・ Put the lug plate (#1206) and fi x it with 2 screws (# 1565).
#1206
Attach Penta-FPC unit
・ Attach the penta-FPC unit.
・ Put 3 AE sensor adjustment springs (#1134) on 3 shafts (#B1131).
・ Mount the AE sensor holder, and temporaly fi x it with 3 screws
(#1133) by giving them about 9 turns.
Note ）
Do NOT tighten
sensor is not damaged.
・ Mount the horizontal-display LCD unit, and fi x it with 2
screws (#1566).
・ Attach 2 pieces of the dust-proof tape (#1169).
#1566×2
Horizontal-
display LCD unit
・ Attach the antirefl ection tape (#1199)
on the bottom-display LCD unit.
・ Mount the bottom-display LCD unit,
and fi x it with 2 screws (#1566).
・ Put 2 sponges (#1193), and attach the
dust-proof tape (#1164).
#B1131
#1187
3 screws (#1133)
all the way
#1169× ２
#1566×2
#1199
Bottom-display LCD unit
- Ａ11 ･
#1565×2
#1133×3
so that the AE
#1134×3
#B1131
-
FAA41051-R.3644.A
Penta-FPC unit
#1164
#1193×2
Advertisement
