Xerox Phaser 6125 Service Manual page 139

Phaser 6125/6130 Color Laser Printer Service Manual
Troubleshooting Procedure Table (continued)
Step Actions and Questions
Check the power to the Drive Clutch
27
Assy
Disconnect J26 from the MCU Board.
Is the voltage across P26-4pin <=>
ground on the MCU Board, about +24
VDC when the Interlock Switch (HARN
ASSY INTERLOCK) is pushed?
28 Check the Drive Clutch Assy for
resistance
Disconnect P/J262 of the Drive Clutch
Assy.
Is the resistance across J262-1 and
J262-2 approximately 280-ohm?
Error Messages and Codes
Yes No
Go to step 28. Replace the
MCU Board
(page 8-59).
Replace the Replace the
MCU Board Drive Clutch Kit.
(page 8-59). (page 8-21)
3-41