Xerox Phaser 6125 Service Manual page 145

Phaser 6125/6130 Color Laser Printer Service Manual
Troubleshooting Procedure Table
Step Actions and Questions
Check the paper condition
1
Is the paper wrinkled or damaged?
2 Does the error still occur when
printing?
3 Check the Front Cover for latching
Open and close the Front Cover, and
then latch correctly.
Does the error still occur when
printing?
4 Check around the Regi Sensor
Is there any remaining paper and/or
foreign substance around the Regi
Sensor?
Does the error still occur when
5
printing?
6 Check the Transfer Unit
Is there any remaining paper and/or
damage on the belt of the Transfer
Unit?
1. Remove the Imaging Unit.
7
2. Rotate the Registration and Metal
Registration Rollers with your
finger.
Are the Registration and Metal
Registration Rollers seated correctly?
Are they undamaged and free of
contamination, and do they rotate
smoothly?
8 Check the Regi In and Regi Roll
Actuators for shape and operation.
Are the shape and operation of the
Regi In and Regi Roll Actuators
normal?
Error Messages and Codes
Yes No
Replace the Go to step 3.
paper. Go to
step 2.
Go to step 3. Complete
Go to step 4. Complete
Remove the Go to step 6.
paper and/or
substance, then
go to step 5.
Go to step 6. Complete
Remove the Go to step 7.
remaining paper.
If the belt is
damaged,
replace the
Transfer Unit
(page 8-41).
Go to step 8. Clean the rollers
if possible, or
replace the
Feeder
Assembly
(page 8-25).
Go to step 9. Reseat the Regi
In Actuator and/
or Regi Roll
Actuator.
If broken or
deformed,
replace the
Feeder
Assembly
(page 8-25).
3-47