Xerox Phaser 6125 Service Manual page 192

Color laser printer
Hide thumbs Also See for Phaser 6125:
Table of Contents

Advertisement

General Troubleshooting
4-12
Test
Control Panel Display
Drum Erase
Drum Erase Lamp K
Lamp K
Drum Erase
Drum Erase Lamp YMC
Lamp YMC
NVM Settings
Edits, saves, loads, and prints NVRAM information.
Edit NVM
Edit NVM
Ad0000=00000000*
Please wait
<Press the Left or Right
button to move the
cursor>
<Press the Up or Down
button to change the
value at the cursor>
<Press the Set button to
save the value in Engine
NVM>
<Press the Cancel button
to move one level up the
menu>
Save NVM to
Save NVM
ESS
SaveNVM MCU -> ESS
OK?
Saved
Please wait
<Press the Set button to
save the value in the
Controller NVM>
<Press the Cancel button
to move one level up the
menu>
Load NVM from
Load NVM
ESS
LoadNVM MCU -> ESS
OK?
Processing
Loaded
Please wait
<Press the Set button to
load the value saved in
the Controller NVM to the
Engine>
<Press the Cancel button
to move one level up the
menu>
Test Description
Tests the black Erase Lamp.
Tests the yellow, magenta, and cyan
Erase Lamps.
Displays the current NVRAM value.
Use this function to edit NVRAM
information.
Saves the NVRAM information of the
Engine in the Controller. NVRAM
addresses to be saved are as follows:
1000-10FF, Total: 256Byte
Note:
Information saved in the
Controller NVM can be initialized using
Clear All
NVM.
Loads NVRAM information of the
Engine saved in the Controller into the
Engine.
1000-10FF / 1100-11FF / 1200-12FF
Note:
Information saved in the
Controller NVM can be initialized using
Clear All
NVM.
Phaser 6125/6130 Color Laser Printer Service Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Phaser 6130

Table of Contents