Xerox Phaser 6125 Service Manual page 214

General Troubleshooting
4-34
Tray Feed Solenoid (Auto)
Solenoid that controls the drive of the Tray Feed Roll
Note
This test should performed when the Feed Roller fails to rotate during the
Tray 2 Feed Solenoid (Half) test.
Caution
If the front cover will be open for more than 5 minutes, remove the
Imaging Unit and cover it or place it in a dark location to avoid exposure to
light.
1. Remove the Left Side Cover (page 8-17).
2. Defeat the Front Cover interlock switch.
3. Enter the Service Diagnostic menu (page 4-5).
4. Perform the Tray 2 Feed Solenoid (Auto) test:
Test> Tray 2 Feed Solenoid
5. Observe the Feed Solenoid movement.
6. Press the Cancel button to stop the Tray 2 Feed Solenoid (Auto) test.
Engine Diag
(Auto).
Tray 1 Feed Solenoid
Phaser 6125/6130 Color Laser Printer Service Manual
> Motor
s6130-198