Sensor Tests - Xerox Phaser 6125 Service Manual

General Troubleshooting

Sensor Tests

4-20
Exit Sensor
Warning
Allow the Fuser to cool down before starting the procedure.
1. Enter Service Mode (page 4-5).
2. Open the Front Cover.
3. Perform the Exit Sensor test:
4. Move the Sensor up and down and check the information on the Control
Panel display. The Low and High values change from 0 up 99.
Control Panel
Exit Sensor
5. Press the Cancel button to stop the Exit Sensor test.
Engine Diag
Normal
L-0
Phaser 6125/6130 Color Laser Printer Service Manual
> Sensor Test > Exit Sensor.
Exit Sensor
H-0
s6130-184