Technology Specific Bootstrap Register; Device Control (Short Ascii Command List) - JAI GO-5101M-PMCL-1 User Manual

GO-5101M-PMCL-1 | GO-5101C-PMCL-1 | User Manual (Ver. 1.0)

Technology Specific Bootstrap Register

Name Access
SupportedBaud
R/O
rates
CurrentBaudrate R/W
Device Control (Short ASCII Command List)
Note: Descriptions of each command can also be found in
Name
DeviceFirmware Version
DeviceReset
Short
Values
ASCII
Indicate Support/Non-
support status for
each baud rate
bit0: 9600bps
SBDRT
bit1: 19200bps
bit2: 38400bps
bit3: 57600bps
bit4: 115200bps
READ: Indicate
current baud rate.
WRITE: Set any bit of
baud rate.
CBDRT
bit0: 9600bps
bit1: 19200bps
bit2: 38400bps
bit3: 57600bps
bit4: 115200bps
Interface
Short ASCII
Access
R/O VN
W/O CRS00
MIN MAX Default
SBDRT?<CR><LF>
This camera supports 9600bps, 19200bps,
0x01 0xFF 0x1F 38400bps,57600bps, and 115200bps.
Display the supported transmission baud rate
as bit fields
CBDRT=[Param.]<CR><LF>
CBDRT?<CR><LF>
In case of WRITE execution (change baud
1 rate), it needs to control in the proper sequence
0x01 0x80
(9600bps) between Host and Camera.
Display the currently configured transmission
baud rate. To change the transmission baud
rate, use this command (configuration steps).
"Device
Values Default
Firm Ver. No.
1
- 85 -
Short ASCII Command List
Description
Control" (Setting List).
Description
VN?<CR><LF>
-
Display the firmware version.
CRS00=1<CR><LF>
-
Reset the device.